Brocade Communications Systems Brocade 8/12c Command Reference Manual page 756

22
portFencing
--help
EXAMPLES
To enable port fencing for the CRC area on all E_Ports:
To enable port fencing for all areas on all E_Ports:
To enable port fencing for the CRC, ITW, and PE areas on all E_Ports:
To enable port fencing for the ST area on all E_Ports and optical F_Ports:
To enable port fencing for the ST area on all port types:
722
The following operands are required with the --enable and --disable options.
port_type_list | all
Specifies one or more port types for which to enable or disable port fencing. When
specifying multiple port types, the list members must be separated by a comma.
Alternately, use the all option to specify all of the following port types:
e-port
Enables or disables port fencing for all E_Ports.
fop-port
Enables or disables port fencing for all optical F_Ports.
cu-port
Enables or disables port fencing for all copper F_Ports. This operand is
supported only on embedded platforms and only on copper ports.
port
Enables or disables port fencing for all physical ports.
-area area | -area all
Specifies one or more Fabric Watch areas to be monitored by the port fencing
feature. Areas are not case sensitive. Alternately, use the all option to specify all
of the following areas:
CRC
Cyclic redundancy check error.
ITW
Invalid word transmission
PE
Protocol error
ST
State Change
LR
Link reset
C3TX_TO
Class 3 frame discard due to timeout.
Displays the command usage.
switch:admin> portFencing --enable
switch:admin> portFencing --enable e-port -area all
switch:admin> portFencing
switch:admin> portFencing
switch:admin> portFencing
e-port -area crc
--enable e-port -area CRC,ITW,PE
--enable e-port,fopport -area ST
--enable all -area ST
Fabric OS Command Reference
53-1001764-01