Toner Page - Xante ScreenWriter 3 Manual

2. Turn the print density dial toward the H (Higher density) to
darken the print or toward the L (Lower density) to lighten the
print (fig. 6.13).
3. Close the Multipurpose Feeder.
Note: Check the print density dial when you replace a toner
cartridge. The setting for the previous cartridge may be too
high or low for the new cartridge.

Toner Page

The Toner Page feature automatically prints a toner reorder form
when the cartridge needs to be replaced. To order a new cartridge,
fill out the form and return it to XANTÉ or to your XANTÉ vendor.
If the feature is enabled and toner is low, the reorder form prints
every 250 pages.
Set Toner Page from the MISC: TONER PAGE configuration menu.
Yes, the factory default, enables this feature; No disables it.
6-30 Configurationbb
Fig. 6.13 Adjust the Print Density Dial
______________________________________