Xante ScreenWriter 3 Manual page 115

– The Product Information screen lists the product name.
• I/O Timeout allows you to select the number of seconds the
printer waits for additional incoming data before cancelling a job
and returning to the idle state, ready to accept another job.
• Print Info allows you to print a copy of the same information
available through Get Info.
• Receive Queue gives you access to a buffer that stores
PostScript processing information. Check this file for
information if you receive a PostScript error while printing.
• Reset Controller allows you to reboot and reinitalize the printer
from your computer.
• Send Ctrl-D sends a Control-D (PostScript's end-of-job marker)
to the printer.
• Send PostScript File allows you to download PostScript files to
your printer.
• Set Printer Name allows you to rename your printer on a
network other than Novell. Your printer's default name is the
product name, which can be confusing on networks where there
may be more than one printer of the same model.
• Status provides a fast, easy method to check current printer
status. For example, it can indicate if your printer is idle (ready
to receive and process new data) or busy.
• TCP/IP Address allows you to set the address or enable the
LPR interface on the optional Ethernet port.
• Update PPD Fonts allows you to add all of your downloaded fonts
to your current PPD (PostScript Printer Driver). Your PPD should
be updated using this menu anytime you download fonts to the
printer. This allows you to use the downloaded fonts as printer
resident and to avoid packaging these font files with print jobs.
• I/O Buffer Clear allows you to empty the I/O buffer before
sending any data to it. This makes communication more reliable.
On, the factory default, enables this feature and Off disables it.
___________________________________________ PC Setup 4-29