Xante ScreenWriter 3 Manual page 286

3. Close and latch the top cover (fig. 11.24).
4. Reload the multipurpose feeder, if necessary. Close the
multipurpose feeder cover if the media fits completely inside
the tray. See "Multipurpose Feeder" in chapter 2.
Note: If the printer was turned off to clear the jam, turn on
5. Verify that READY/IDLE appears in the front panel window.
Note: If the jam was only in the multipurpose feeder or a
11-32 Troubleshootingbb
Fig. 11.24 Close the Top Cover
the printer before loading the multipurpose feeder.
paper cassette and the error message does not
disappear, open and close the top cover and
multipurpose feeder again.
____________________________________