Xante ScreenWriter 3 Manual page 154

3. Type in the name of the Novell file server that your printer will
poll for print jobs exactly as it appears in PConsole; then click
OK to return to the main menu.
Note: The printer enters a waiting state while it saves the file
4. If you did not use the printer's default Novell print server
name in the file server configuration with PConsole (in
"Configure the Novell Server (NetWare 3.X and 4.X), see step
4.c), change the print server login name to agree with the print
server name set up on the file server.
Note: If you used the printer's default Novell print server
a. Choose Controller: Novell: Set Print Server Login Name.
Fig. 5.14 Set Print Server Login Name Window
b. Type in the Print Server name exactly as it was entered
in the file server configuration using PConsole (in
"Configure the Novell Server (NetWare 3.X and 4.X)"
see step 4.c); then click OK to return to the main menu.
Note: The printer enters a waiting state while it saves
5. If a password is required to access the file server, change the
print server password to agree with the password set up on the
file server.
5-16 Ethernet Setupbb
server name. Do not proceed until the printer displays
the READY/IDLE message.
name (see "Selecting the Novell Names" earlier in this
chapter) this step is not required.
the file server name. Do not proceed until the
printer displays the READY/IDLE message.
______________________________________