Loading Media - Xante ScreenWriter 3 Manual

Multipurpose Feeder
Your printer's multipurpose feeders handle media sizes from 3.94" x
5.83" (100 mm x 148 mm) up to 13.00" x 35.50" (330 mm x 902
2
mm) and media weights from 16 - 36 lb bond (60 - 135 g/m ). Use
the multipurpose feeder extension to support larger media. Select the
media size from the front panel MISC:MAN FEED menu or use the
custom size option in your application.
You can load paper, transparencies, labels, Myriad film, and
envelopes to a stack height of .70" (18 mm) in the multipurpose
feeder. For typical media weights, this equals approximately 150
sheets of paper, 10 envelopes, or 30 transparencies, labels, or sheets
of Myriad film.

Loading Media

Select the cassette or multipurpose feeder as the media source using
your application's Print dialog box or the printer's front panel Tray
Select key. Use tray chaining to pull paper from all cassettes and the
multipurpose feeder that are loaded with and configured for the same
paper size.
Load envelopes short edge first in the envelope cassette and the
multipurpose feeder. Load envelopes with the flap closed in the
envelope cassette or flap open in the multipurpose feeder to provide
a flatter address area print surface.
Load media in the cassettes and multipurpose feeder print side up,
leading edge to the back of the printer. Most media packages indicate
the print side. Use the following chart to determine alignment for
standard paper sizes in the universal cassette and multipurpose
feeder.
_______________________________________ Media Options 7-9