Selecting Ppd Options (Windows Nt 4.0) - Xante ScreenWriter 3 Manual

a.
b.
c.
6. Click OK. The Print dialog box reappears. Then, click OK to
send the file to the printer.

Selecting PPD Options (Windows NT 4.0)

To configure a printer feature from the Print dialog box
1. Install and configure the AdobePS printer driver and your
printer's PPD following the instructions in chapter 4.
2. Choose File: Print. The Print dialog box appears (fig. 6.7).
_______________________________________
Use the right scroll bar to locate the feature in the Printer
features box. Highlight the feature to display the options
in the Change Setting for box (fig. 6.6).
Select the setting from the drop down menu in the
Change Setting for box.
Click Apply after you have made the desired changes.
Note: For example, to change the printer memory
setting, scroll through the Installable options
until you see VMOption. Highlight it; then,
select the amount of memory on the printer (see
the memory size listed on the printer's start-up
page). Click Apply.
Fig. 6.7 Windows NT 4.0 Print Dialog Box
Configuration 6-11