Xante ScreenWriter 3 Manual page 42

4. Select either XANTÉ Utilities to install only the utilities or
select the appropriate PPD(s) for your printer(s) and the
utilities will be included during installation; then, click Install
(or stop installation by clicking Quit).
• XANTÉ Utilities installs Adobe Downloader, XANTÉ
Command Center, and the XD-1 software for
Accel-a-Writer, PlateMaker, and ScreenWriter printers.
• Individual printer options install Adobe Downloader,
XANTÉ Command Center, PPD(s), and QuarkXPress
PDF(s) (if necessary) for selected printers and launch the
AdobePS printer driver installation program.
• If necessary, change the installation destination for the
files in the Install Location box.
5. Select Quit and go to the appropriate section listed below after
the utility programs, PPD(s), and PDF(s) are installed.
• If you only chose to install the XANTÉ Utilities, go to
"Adobe PostScript Printer Drivers" later in this chapter to
load the printer driver and your printer's PPD manually.
• If you chose one or more individual printers, go to step 6
to proceed with the AdobePS installation.
6. Click Continue in the AdobePS introduction screen.
Note: On most systems, the AdobePS 8.6 program
automatically launches unless this version is installed
already. If not, you can open it manually by double-
clicking Adobe 8.6 Installer in the Printer
Drivers:AdobePS 8.6 folder.
7. Read the license agreement and select Continue (or Accept) to
bring up the AdobePS Installer window (fig. 3.2).
3-6 Macintosh Setupbb ____________________________________