Xante ScreenWriter 3 Manual page 120

2. Choose Configure: Spool Device. The Select Spool Device
window appears (fig. 4.22).
3. Select the disk to store the spooled jobs (or select NONE to
disable spooling); then click OK. The Spooler window
reappears (fig. 4.19).
4. Choose Configure: I/O Interfaces to Spool; the Select I/O
Interfaces to Spool window appears (fig. 4.23).
Fig. 4.23 Select I/O Interfaces to Spool Window
5. Select the interface that you use to send files to the printer;
then click OK. The Spooler window reappears (fig. 4.21).
6. Click Close to exit the Spooler menu; then select File: Exit to
close XANTÉ Command Center.
4-34 PC Setupbb
Fig. 4.22 Select Spool Device Window
__________________________________________