Adobe Postscript Printer Drivers; Deleting Previous Driver Versions - Xante ScreenWriter 3 Manual

7. Go to the appropriate section for your operating system in
"Adobe PostScript Printer Drivers" to continue the installation.

Adobe PostScript Printer Drivers

Before using your printer, you must install the Adobe PostScript
driver and your printer's PPD.
XANTÉ Utilities Installer launches the installation program for the most
recent Adobe PostScript printer driver on systems running Windows NT
4.0. It allows you to select the Adobe PostScript printer driver to load on
systems running Windows 95 or 98.
This section describes loading the printer driver manually for each
operating system and starting the installer. See "XANTÉ Utilities
Installer" earlier in this chapter to load XANTÉ Utilities manually.
See "PDFs Folder" later in this chapter to load QuarkXPress PDF
files manually.

Deleting Previous Driver Versions

Normally, you do not have to delete previous Adobe PostScript
printer driver or any previously installed Adobe PostScript printers.
However, if you suspect installation problems, first remove your
installed printers from the Printers dialog box in the Windows
Control Panel and reinstall them via the Adobe PostScript Printers
dialog box which is also in the Windows Control panel.
If after removing and reinstalling your printers, you still experience
problems, delete all previous driver versions and reinstall your
printers using the Adobe PostScript Printers dialog box.
Deleting AdobePS 4.1.X and Later
To delete AdobePS 4.1.X or later versions of the driver
1. Open Windows. Select Start: Programs: Windows Explorer.
The Windows Explorer main window opens.
4-10 PC Setupbb __________________________________________