Instead of my image (or text), the output is a solid black page.
Blank areas appear in my image (or text).
Media comes out of the printer creased or crumpled.
_____________________________________ Troubleshooting 11-13
•
The density setting may need adjusting. See
"Adjusting Print Density" in chapter 6.
•
The toner cartridge may need replacing. See
"Toner Cartridge" in chapter 2.
•
Media may be damp or otherwise damaged.
Make sure the it meets the requirements in
"Media Specifications" in chapter 7. If
necessary, replace the media. See "Paper
Cassette" and "Multipurpose Feeder" in
chapter 2.
•
The sealing tape may not be pulled completely
out of the toner cartridge. Remove the
cartridge and pull out the tape. See "Toner
Cartridge" in chapter 2.
•
Media may be damp or otherwise damaged.
Make sure it meets the requirements in
"Media Specifications" in chapter 7. If
necessary, replace the media. See "Paper
Cassette" and "Multipurpose Feeder" in
chapter 2.
•
The media may be loaded improperly. Make
sure it is loaded print side up.