Status Lights; Control Keys - Xante ScreenWriter 3 Manual

Status Lights

Printer front panel status lights, or LEDs (Light Emitting Diodes),
indicate printer status (fig. 6.1).
ONLINE/
READY
DATA
MANUAL
DUPLEX

Control Keys

Printer front panel control keys allow you to configure some printer
features and to access the configuration menus.
ONLINE
FORM
FEED
TRAY
SELECT
6-4 Configurationbb
Online/Ready LED is on when the printer is
ready to receive data. It is off when an engine
error occurs or the printer cover is opened.
Data LED is on and does not blink when
the printer is receiving data. Blinking
indicates that the printer is processing data.
Manual LED is on when the multipurpose
feeder is selected.
Duplex LED is not functional on the
ScreenWriter 3.
Online key is used to take the printer on and
off line. The window reads READY/IDLE
when the printer is on line or OFFLINE if it
is off line. The printer must be on line to
receive data from your computer.
Form Feed key allows you to feed a blank
page through the printer. Some applications
do not issue a form feed command at the end
of a page. If this happens, take the printer
off line and press the Form Feed key; after a
blank page feeds, press the Online key to put
the printer back on line.
Tray Select key allows you to change the
default paper tray. Press once to display the
current tray selection. Press the Tray Select
key to toggle between the available trays.
______________________________________