Xante ScreenWriter 3 Manual page 147

Now that the Novell server is configured for NetWare 3.X and 4.X,
skip to "Configure the Print Server Emulation" later in this chapter.
Configure the Novell Server (NetWare 5.X)
Use XANTÉ Command Center to setup the Novell print server
name, the file server name of the Novell server and the Printer
AppleTalk name if it is different. (See "Selecting the Novell Names"
earlier in this chapter for details.) Also use Command Center to
enable login and printing.
To configure the Novell server for NetWare 5.X
1. Login to the Novell server as the administrator or equivalent.
2. Run NWAdmin. A NetWare Administrator window similar to
the following appears (fig. 5.3).
_______________________________________
Fig. 5.3 NetWare Administrator Window
Ethernet Setup 5-9