Xante ScreenWriter 3 Manual page 152

17. Enter the printer server name. This name must match the Novell
Printer Serve Name from the printer start-up page. Then, click
Create. The following Print Server window appears (fig. 5.11).
18. Click Assignments and then click Add. The Select Object
window reappears (fig. 5.9).
19. Highlight your printer's name in the left side of the window.
Then, click OK. The Network Administrator window
reappears with three new icons on the list (fig. 5.12).
Fig. 5.12 Network Administrator Window with New Icons
20. Enable Novell Print Server on the printer's front panel using
the following procedure.
5-14 Ethernet Setupbb
Fig. 5.11 Print Server Window
______________________________________