Cleaning The Printer; Fuser Assembly Cleaning - Xante ScreenWriter 3 Manual

1. Turn off the printer; then, unplug the power cord from the
power source.
2. Remove all media from the multipurpose feeder, close it and,
if necessary, the top cover. See chapter 2 for instructions.
3. Remove any installed optional paper feeder (see chapter 10,
"Options," for details). Never move the printer with an
optional feeder installed.
4. Remove the toner cartridge following the procedure in chapter
2. Never move the printer with the cartridge installed.
a. Place the cartridge in its original bag to protect it from
light. If you no longer have this bag, place the cartridge in
a dark bag or wrap it in a dark cloth.
b. Make sure the cartridge stays level during the move. Rock
it gently to redistribute toner before reloading the cartridge
in the printer. See "Toner Cartridge" in chapter 2.
5. Remove all interface cables and the power cord.
6. Move the printer to a location that meets the guidelines in
"Printer Location" in chapter 2.
7. Set up the printer following the instructions in chapter 2.

Cleaning the Printer

To help keep your printer running smoothly and avoid unnecessary
problems, perform the following cleaning steps monthly. Also, clean the
printer inside after removing a media jam or replacing the toner
cartridge.

Fuser Assembly Cleaning

1. Turn off and unplug the printer.
_________________________ Maintenance and Specifications 9-5