Exterior Cleaning - Xante ScreenWriter 3 Manual

3. Reassemble the printer and reconnect it to the power source.

Exterior Cleaning

1. Turn off your printer and disconnect it from the power source.
Caution: Use only water or mild detergent for cleaning. To
prevent discoloration, cracking, and deformation of the
case, do not use alcohol, ammonia-based cleaners, or
other volatile cleaners on or around the printer. Never
spray or pour solutions directly on the printer. Always
put the solution on the cloth and wipe the printer with
the cloth.
2. Clean the printer's exterior using a clean, lint-free cloth
dampened with water (fig. 9.4).
3. Give the printer a few minutes to dry thoroughly. Then,
reconnect the printer to the power source.
_________________________
Fig. 9.4 Exterior Cleaning
Maintenance and Specifications 9-9
Scale 75%