Ports Menu; Procedures; Spooler - Xante ScreenWriter 3 Manual

More X-ACT
This option allows you to calibrate printer line length to a standard
and to correct inaccuracies in printing width, height, skew, and
angle. See "Accurate Calibration Technology (X-ACT)" later in this
chapter for details.

Ports Menu

The Ports menu allows you to select the PC port through which you
are connected to the printer for XANTÉ Command Center.

Procedures

This section covers procedures for using XANTÉ Utilities.

Spooler

If your printer has an optional hard drive, you can use the spooler to
place print jobs into a queue on the hard drive. These jobs then can
be reprinted from the queue, eliminating the time required to process
and send the file to the printer. The Save Spooled Job feature allows
you to save up to 250 print jobs on the hard drive for reprinting later.
See "Spooler" in chapter 6 for details.
4-32 PC Setupbb
Fig. 4.20 Ports Menu
__________________________________________