Host Setup - Xante ScreenWriter 3 Manual

You can minimize some of the NetBEUI constraints just listed by
installing an internal disk drive and setting the NetBEUI's Spool
setting to True. This provides free disk space for print job storage
before sending the job to be processed, and allows the fully compiled
job to be sent from this drive to the printer as a complete unit. In
most cases, it guarantees a successful download to the printer.
NetBEUI, originally designed for connection between a server and
client, works on the principle that once a connection is made, the
sender can transmit the data to the printer. The printer becomes a
host PC on the network.

Host Setup

To set up your PC in a NetBEUI environment
1. Go to your desktop and click Start.
2. Select Settings and click Control Panel.
3. Double click Network.
Note: If you already have NetBEUI installed as a protocol,
4. Click Add, Protocol, Microsoft, and NetBEUI. Then, press
OK. You may need the Window 95/98 OS CD to install the
necessary drivers. If so, insert the CD in your CD-ROM drive
and click OK.
Note: If you already have Client for Microsoft Networks
5. Click Add, Client, Microsoft, and Client for Microsoft
Networks. Then, click OK.
6. Click NetBEUI under Network Configuration and click
Properties. Under Advanced Properties, select "Set this
protocol to be the default protocol." Then, click OK.
5-32 Ethernet Setupbb
skip step 4.
installed as a client, skip step 5.
______________________________________