Adobeps 8.6 - Xante ScreenWriter 3 Manual

AdobePS 8.6

Following installation of the XANTÉ Utilities and your printer's
PPD, AdobePS launches automatically. AdobePS also can be
launched manually from the Printer Drivers: AdobePS 8.6 folder.
The AdobePS installation program loads AdobePS, and AdobePS
Readme file, an AdobePS driver Custom Page extension into the
Printer Descriptions folder, and other files required for the Adobe
PostScript printer diver. It does not load PPD files automatically.
Installation overwrites any earlier AdobePS version but will not
overwrite other printer drivers. Check the Readme First file in the
AdobePS 8.6 folder before beginning driver installation.
Installing AdobePS 8.6
1. Insert the XANTÉ Utilities CD-ROM into your Macintosh.
2. Double-click the XANTÉ Utilities 4.X icon.
3. Double-click the AdobePS Installer in the Printer Drivers:
AdobePS 8.6 folder.
4. Follow steps 6 through 9 in "XInstaller" earlier in this chapter;
then, after your Macintosh restarts, install your printer's PPD
(see the next section).
Installing the PPD for AdobePS 8.6
1. Insert the XANTÉ Utilities CD-ROM into your Macintosh.
2. Double-click the XANTÉ Utilities 4.X icon.
3. Select your printer's PPD in the Printer Descriptions folder.
4. Drag the PPD to the System Folder: Extensions: Printer
Descriptions folder on you Macintosh.
The AdobePS printer driver and your printer's PPD are installed. See
"Configuring the PPD" later in this chapter to complete the driver
setup.
3-10 Macintosh Setupbb ____________________________________