Xante ScreenWriter 3 Manual page 78

Note: Each media type can have only one set of options. For
4. Check Options to make sure the paper (media) source and print
settings are correct. If any of the settings are incorrect, click
Change Options; when the More X-ACT Advanced Setup
window appears (fig. 3.21), make the necessary changes.
Fig. 3.21 More X-ACT Advanced Setup Window
a. Under Paper Source, if you select Manual Feed, go to
step 4.b; if not, skip to 4.c.
b. Under Manual Feed Options, if you are using standard
size media, click Standard Paper Size and select the size
from the drop-down menu. If you are using a custom
size, click Custom Paper Size and enter the size and
select the unit of measure (inch, millimeter, or
centimeter).
3-42 Macintosh
example, if you calibrate for 8 1/2 x 11 (letter) paper,
you can choose Paper as the media type. If you need to
calibrate for 11 x 17 (tabloid) paper, you need to select
another media type such as User-defined 1 so that the
first calibration for letter size paper is not overwritten.
Setupbb ____________________________________