Xante ScreenWriter 3 Manual page 93

Note: If you are not using a listed application for
Fig. 4.2 Select Your Printer Application(s)
c. Select the destination directory for the application, if you
specified an application and click Next.
Note: If you use QuarkXPress or PageMaker, setup
d. Select the destination directory for XANTÉ Utilities and
click Next.
e. Select the program folder for the XANTÉ Utilities and
click Next.
f. Select the AdobePS printer driver (fig. 4.3) for Windows
95 or 98, and click Next. This window does not appear for
Windows NT 4.X because only the AdobePS 5.X driver
(which supports both PostScript Level 2 and 3) is available.
For NT 4.X skip to step 3 in "Installing the AdobePS
Printer Driver and Printer PPD" in the "Windows 95, 98,
and NT 4.0 Drivers" section later in this chapter.
___________________________________________
Windows 95 and 98, select Next and go to step
3.d. For NT 4.X, select None and Next and go to
step 3.e.
will install the PPD(s) and /or PDFs for your
printer in the default printer directory for those
applications or in another directory you choose.
PC Setup 4-7