Xante ScreenWriter 3 Manual page 109

a. In the PostScript output format box, select PostScript
(optimized for speed) if you have a Pentium processor. If
not, select PostScript (optimized for portability-ADSC).
b. Under PostScript header, select Download header with
each print job.
c. Under PostScript timeout values, make sure the setting are
Job timeout: 0
Wait timeout: 240
7. Click the General tab if you want to print a test page; then
click Apply and then Print Test Page. Then, skip to step 9.
8. Select Yes for Send Control D after each Job (Windows NT
4.X).
9. Click OK. The Printer Properties window closes.
___________________________________________
Fig. 4.16 PostScript Tab
PC Setup 4-23