Align Paper; Crd Directory - Xante ScreenWriter 3 Manual

Note: In some cases, turning the I/O Buffer Clear feature off
may increase communication speed.

Align Paper

This option allows you to adjust the printer margin. Printer margin
refers to the page's imageable area, not to margin settings in an
application. The imageable area is the portion of a page on which the
printer can lay down toner; you may adjust the position of this
imageable area. See "Printer Margin Adjustment" later in this
chapter for details.

CRD Directory

This option is not for use with laser printers.
Configure
This option allows you to save printer configuration information to a file
on your PC. If printer configuration is set back to the factory defaults
(following installation of a ROM upgrade, for example), this file can be
downloaded to your printer to restore your customized configuration.
Linearize
This menu allows you to create and download custom curves to your
printer. These curves can be selected for a specific job from the Print
dialog box or set as the default from the printer front panel. See
"Calibration with a Densitometer (Gamma)" later in this chapter for
details.
Spooler
This option allows you to enable and control printer hard drive
spooling. Spooling frees up the communication channel between
your PC and printer which permits your computer to return to other
processing quickly. Spooling can be enabled for each interface
independently using this menu or printer front panel Interface menus.
See "Spooler" later in this chapter.
Novell
The Novell menu (fig. 4.19) allows your Network Administrator to
configure the Novell Print Server emulation on your printer's
optional Ethernet interface. See chapter 5, "Ethernet Setup" for
details.
4-30 PC Setupbb __________________________________________