Xante ScreenWriter 3 Manual page 133

3. Select the media type you are using from the Media Type
drop-down menu.
Note: Each media type can have only one set of options. For
4. Check Options to make sure the paper (media) source and print
settings are correct. If any of the settings are incorrect, click
Change Options; when the More X-ACT Advanced Setup
window appears (fig. 4.31), make the necessary changes.
Fig. 4.31 More X-ACT Advanced Setup Window
a. Under Paper Source, if you select Manual feed go to step
4.b; if not, skip to 4.c.
___________________________________________
example, if you calibrate for 8 1/2 x 11 (letter) paper,
choose Paper as your media type. If you also calibrate
for 11 x 17 (tabloid) paper, choose User-defined 1 as
your media type.
PC Setup 4-47