Xante ScreenWriter 3 Manual page 164

2. Open XANTÉ Command Center by double-clicking its icon.
3. Choose Controller: General: TCP/IP Address.
4. If necessary (check with your System Supervisor), change the
network class by clicking the appropriate option button.
5. Change the printer's default TCP/IP address to the address
assigned by your System Supervisor using the scroll bars under
each octet.
6. Click OK. The main menu reappears.
7. Choose File: Exit. Command Center closes.
8. Restart the printer to make the new TCP/IP address take effect.
Using XANTÉ Command Center (Macintosh)
1. Open XANTÉ Command Center by double-clicking its icon.
2. Choose Networking: TCP/IP: Address.
Fig. 5.21 Macintosh TCP/IP Address Control Window
5-26 Ethernet Setupbb
Fig. 5.20 PC TCP/IP Address Window
______________________________________