Xante ScreenWriter 3 Manual page 24

5. Align the media stack and load it into the cassette print side up,
leading edge to the back (fig. 2.20). See "Media Source" in
chapter 7 to determine whether to load media short or long
edge first.
6. Adjust media guides to the size of the media stack.
Caution:
7. Replace the cassette cover.
8. Slide the cassette into the printer until it snaps into place.
Note: You will feel a slight resistance as you push the
2-16 Installationbb
Fig. 2.20 Load the Media
To prevent jams, make sure the media fits between
the paper guides and under the cassette's retaining
clips (fig. 2.20).
cassette into the printer caused by the catch that
prevents the cassette from being dropped.
_________________________________________