Xante ScreenWriter 3 Manual page 269

Bold print appears shaded on the output.
Horizontal banding appears on the printed image.
_____________________________________ Troubleshooting 11-15
• The density setting may need adjusting. See
"Adjusting Print Density" in chapter 6.
• The toner cartridge may need replacing. See
"Toner Cartridge" in chapter 2.
• Paper, dust, and toner may have accumulated
inside the printer. Clean it. See "Cleaning the
Printer" in chapter 9. Use the cassette cover to
prevent dust and debris from settling on the
media and in the printer.
• Media may be damp or otherwise damaged.
Make sure it meets the requirements in
"Media Specifications" in chapter 7. If
necessary, replace the media. See "Paper
Cassette" and "Multipurpose Feeder" in
chapter 2.
• Toner may have settled in the cartridge.
Remove and shake it gently to redistribute the
toner. See "Toner Cartridge" in chapter 2.
• The density setting may need adjusting. See
"Adjusting Print Density" in chapter 6.
• The toner cartridge may need replacing. See
"Toner Cartridge" in chapter 2.