Paper Mode; Power Save; Printer Timeout - Xante ScreenWriter 3 Manual

Paper Mode

The paper cassette media guides activate cams which notify the
printer of the paper size. Because some international and North
American paper sizes are very similar in size, the MISC:PAPER
MODE configuration menu specifies whether the cassette setting is
for North American paper sizes (US) or for International paper sizes
(Euro).

Power Save

Power Save conserves power when the printer is not in use. When
this feature is enabled, the printer enters a low-power state after 30
minutes of inactivity.
Set Power Save from the MISC:POWER SAVE configuration menu.
Off, the factory default, disables this feature; On enables it.

Printer Timeout

The Timeout feature allows you to select the number of seconds the
printer waits for additional data before cancelling a job and returning
to the READY/IDLE state.
Set Timeout from the MISC:TIMEOUT configuration menu. The
factory default of 40 seconds (40 Sec) is an average setting. Set
timeout according to the type of files you send. Use a low setting for
small, simple files to prevent an indefinite tie-up on one job. Use the
300 or Never setting for large files, such as graphic intensive or CAD
(Computer Aided Design) files, to allow enough processing time.
With the NEVER selection, the printer does not timeout; it waits
until it receives additional data or until the printer is reset.
_______________________________________ Configuration 6-25