Introduction; Status Messages - Xante ScreenWriter 3 Manual

Introduction

This chapter describes status messages that can direct you to a
problem's source, suggests solutions for some typical printer setup
and print quality problems, and provides information about
preventing and clearing media jams.

Status Messages

Printer front panel messages provide printer status information and
can help you determine the source of a problem or media jam.
EARLY PAPER JAM
E:FIFO
E:FIXING ROLLER
E:FUSER
E:LASER
E:MOTOR
EXIT PAPER JAM
FRONT COVER OPEN
_____________________________________
A media jam has occurred along the
paper path caused by media reaching a
position earlier than expected.
The FIFO SIMM or SODIMM is not
present, is not properly inserted, or is
broken.
There is a hardware problem with the
fuser.
There is an error with the fuser, such as
a temperature inaccuracy.
There is a hardware problem with the
laser.
There is a hardware problem with the
motor.
A media jam has occurred after media
has been printed but before it has been
deposited in the output tray.
The multipurpose feeder cover is open.
Troubleshooting 11-3