Xante ScreenWriter 3 Manual page 128

1. Select the gamma curve to update from Update Transfer Curve
in the Linearization window (fig. 4.25).
2. Click Advanced. The Advanced Settings window appears (fig.
4.28). Use the appropriate scroll bars to make the adjustment
and click OK to return to the Linearization window (fig. 4.25).
3. Click Enter Curve/Linearize to create a new curve and
download it to your printer. The Densitometer Data Entry
window appears (fig. 4.27).
4. Click Linearize (fig. 4.27). The new curve replaces the existing
curve on your printer. The Linearization window reappears.
5. Click Close; the Linearization window closes. Then, select
File: Exit to close Command Center.
Managing Custom Gamma Curves
You can retrieve custom gamma curves (that you created or
downloaded using the densitometer and Command Center) from
your printer and save them to your system. These files can be
downloaded to the printer again as needed.
To manage custom gamma curves, open XANTÉ Command Center
and select Graphics: Linearization. The Linearization window
appears (fig. 4.25). Then, use one of the following procedures to
manage your custom gamma curve.
4-42 PC Setupbb
Fig. 4.28 Advanced Gamma Settings
__________________________________________