Xante ScreenWriter 3 Manual page 129

• To retrieve a custom gamma curve from the printer, click Load
from printer.
• To retrieve a custom gamma curve saved to your PC, click Load
and select the file.
• To save a custom gamma curve to your PC, retrieve it from the
printer using Load from printer; then click Save.
• To save a custom gamma curve to your printer, retrieve it from your
PC using Load. Select the custom gamma curve to be updated from
the Update Transfer Curve list; and click Save to printer.
Resetting Custom Curve Defaults
You can reset one or all custom curves to the factory setting(s).
To reset a custom gamma curve to the factory default (which is a
copy of the standard Gamma 0 curve)
1. Highlight the curve to change in the Update Transfer Curve list
in the Linearization window and click Reset Curve(s) (fig.
4.25). The Reset Curves window appears.
2. Choose either Reset Custom Gamma X to the factory setting
(the X will be replaced by the number of the curve you
highlighted), or choose Reset all to factory settings. Then,
select Negative Film if the final printed output will be a
negative print.
3. Click Ok. After the curve or curves are reset, the Linearization
window reappears.
___________________________________________
Fig. 4.29 Reset Curves Window
PC Setup 4-43