Xante ScreenWriter 3 Manual page 241

4. Remove all media from the multipurpose feeder and the output
tray. Close the multipurpose feeder.
5. Pull the cassette out until it stops; then lift up slightly and
remove it from the printer (figs. 2.16 and 2.17).
Warning!
6. Lift the printer over the feeder and align the two stubs on the
feeder with the holes on the bottom of the printer (fig. 10.2).
Fig. 10.2 Align the Printer over the Feeder
7. Lower the printer onto the feeder. The feeder's stubs should fit
easily into the holes on the printer.
___________________________________________
The printer weighs approximately 58.5 lbs (26.5 kg)
without the toner, cassettes, and media installed.
• Always have two people lift the printer.
• Only lift the printer using the recessed grip areas on
the right and left sides.
Options 10-5