Xante ScreenWriter 3 Manual page 149

5. Select Directory Service Queue and under Print Queue Name
enter the desired queue name (such as XANTE_Q).
6. Click the Browse button to the right of the Print Queue
Volume field (fig. 5.5). The Select Object window appears
(fig. 5.6).
7. Highlight the print server volume in the left side of the Select
Object window. This will be the file server name_sys. Then
click OK; the Create Print Queue window reappears (fig. 5.5)
with the print queue name in the Print Queue Volume field.
8. Click Create (fig. 5.5). The NetWare Administrator window
reappears (fig. 5.3).
9. Highlight the main organization where the printer will be
installed. Then, select Object: Create. The New Object window
reappears (fig. 5.4.).
_______________________________________
Fig. 5.6 Select Object Window
Ethernet Setup 5-11