Trademarks Ethernet® is a registered trademark of Xerox Manual Notice ® XANTÉ is a registered trademark of XANTÉ Corporation. XANTÉ CORPORATION reserves the right to make CORPORATION. changes to this manual and to the equipment Preps® is a registered trademark and ScenicSoft™ is Adobe®;...
Table of Contents Trademarks ............2 Adobe Acrobat Reader-PC ......10 Installing the PostScript Driver ....24 Getting Started ........... 4 Adobe Acrobat Reader-Mac ....... 10 Installation - Macintosh OS X ......25 Removing the Printer ........4 Installation - Windows 98/Me ......11 OS X (version 10.1.5) .........
Getting Started Do not install the printer where it Your printer package contain the Note: If you do not receive your full Removing the Printer will be: following items: shipment or if anything is damaged, call XANTÉ Customer • Subject to direct sunlight, air •...
Getting Started (continued) Installing Toner Cartridges Installing OPC Belt Cartridge Guide Note: Never touch the OPC belt’s Guide Top Cover (Left) SealingTape surface; only handle the car- tridge by the top handle. Guide Touching the belt and exposing (Right) Front Cover Latch Front Cover it to bright light (over two Front Cover...
Getting Started (continued) Installing the Fuser Oil Bottle Installing the Cleaning Roller Installing the Paper Cassette OPC Guide Gear Cleaning Roller Locks Cleaning Roller Locks Cassette Cover Guide Paper Cassette Oil Bottle Locks Oil Bottle Locks Front of Printer Front of Printer Fig.
Getting Started (continued) Connecting to Printer Ports Note: Consult your user’s manual for Width Guide Cassette Cover more information regarding the XANTÉ ColourLaser printers have selection of the different inter- standard LocalTalk, serial, parallel, and Paper Cassette faces. Ethernet ports (fig. 19). These simultaneously active inter- faces can receive jobs from different Fig.
Getting Started (continued) LocalTalk Connection (Macintosh) 3. Plug the DIN-8 connector on the networks using Ethernet to Serial Connection (PC) second LocalTalk connector box into LocalTalk adapters. Check your DIN-8 Connector the Macintosh’s printer port. user’s manual for more informa- RJ-11 Cable tion.
Getting Started (continued) 3. Plug the other connector (either a 1. Turn off your computer. 25-pin or a 9-pin female connector) 2. Connect one end of the CAT 5 into the computer’s serial port. Power Outlet Ethernet cable to your printer’s Ethernet Connection (PC and Mac) Ethernet port.
Installing Adobe Acrobat Reader Adobe Acrobat Reader-PC You will need to install Adobe Acrobat Reader to view or print your printer docu- mentation. Fig. 30 Setup Complete; click OK. Adobe Acrobat Reader-Mac Fig. 28 Acrobat Reader Setup; click Next Fig. 32 Click Continue. Fig.
Installing Adobe Acrobat Reader (continued) Note: If you are online, a caution • Test key moves to the next Installation - Windows 98/Me window appears which allows number to the left of the current This section will take you step-by- you to quit Netscape Navigator number flashing.
Page 12
Installation - Windows 98/Me (continued) Note: After clicking OK, Windows launches the Adobe® PostScript® Printer Driver setup program. This may take a few moments. Fig. 39 Enter IP Address (Network Install only). Fig. 41 Read File Destination. Click Yes. Fig. 37 Click Install Printer. Fig.
Installation - Windows 98/Me (continued) Note: If your printer is directly con- Local Printer-Windows 98/Me nected to your computer, click “Local Printer” in figure 45; then, click Next to continue to figure 46. If your printer will be connected to your network, skip to the “Network Printer”...
Installation - Windows 98/Me (continued) Win95/98/Me LPR Tool This allows you to communicate to your printer through the LPR port Note: For Windows 98 and Me users, you must install this utility to set up your IP, SubNet, and Gateway addresses. Fig.
Installation - Windows 98/Me (continued) Note: After you click Finish (fig. 59), a Network Printer-Windows 98/Me ReadMe file window appears. Read it carefully and then close the window. The Restart Com- puter window appears (fig. 60). Fig. 56 Read License Agreement. Click Yes. Fig.
Page 16
Installation - Windows 98/Me (continued) Note: Make changes for options installed on your printer by first highlighting the option. Then, select the setting under Change Setting. Fig. 62 Select Printer Model. Click Next. Fig. 64 Read Current Settings. Click, Install. Fig.
Installation - Windows 98/Me (continued) Note: If you selected to read the 5. Using a word processing application, 9. Go to DOS (Command) Prompt to ReadMe file, do so and then, open setipsub.ps file from the ping the printer. close the window. ps_files folder.
Installation - Windows 98/Me (continued) 13. Enter your printer’s IP address and Queue name; then, click OK (fig. 71). 14. Click Apply when the Printer Prop- erties window reappears; then, click PPD Configuration 1. Select Start: Settings: Printer Fig. 70 Highlight XanteLPR; click OK. 2.
Installation - Windows NT/2000/XP This section is the installation • Test key moves to the next instructions for Windows NT/2000/XP number to the left of the current only. number flashing. IP Address Configuration • Enter key accepts new address (if When using the IP Address interface, valid) and returns to I/F:IP use the keys on the front panel to set the...
Page 20
Installation - Windows NT/2000/XP (continued) Fig. 77 Read File Destination. Click Yes. Fig. 81 Select Printer. Click Next. Fig. 79 Select Local or Network. Click Next. Fig. 83 Set Your Default Printer. Fig. 54 Choose a Sharing Option. Click Next. Fig.
Installation - Windows NT/2000/XP (continued) Configuring IP, SubNet, and Gateway network administrator. Save the file your printer, contact your to your c:\ drive. Network Administrator. Addresses 6. Go to DOS (Command) Prompt. 10. Go to your Printer Properties (fig. 87) 1.
Installation - Windows NT/2000/XP (continued) PPD Configuration 1. Select Start: Settings: Printers and Faxes. 2. Highlight your printer and click the right mouse button. Select Proper- ties from the drop-down menu. 3. Click the Device Settings tab (fig. 90). Fig. 89 Highlight Standard TCP/IP Port, click New Port.
Installation - Windows NT/2000/XP (continued) Installation - Macintosh (7.5 or higher) If your Mac version is less than 8.1, some libraries required by setup are not available. If your system falls under this, select Pre MacOS 8.1 Setup from the CD-ROM.
Installation - Macintosh (continued) Note: If AdobePS doesn’t open, simply Installing the PostScript Driver double-click AdobePS Installer You can install the Adobe PostScript in the Printer Drivers: AdobePS Driver (Adobe PS) in two ways from the 8.8: (appropriate language) XANTÉ Utilities disk, via the Utilities folder on the CD.
Installation - Macintosh (continued) When the Main Screen reappears, Installation - Macintosh OS X you can register your printer (if online). You must have the latest Mac OS X ver- sion to properly install this printer. Note: You must first verify that AppleTalk is enabled to continue OS X installation.
Installation - Macintosh OS X (continued) OS X (version 10.1.5) Note: The install location for your printer’s PPD is Hard Drive: Note: You must double-click the Library: Printers: PPDS: Con- OSX_setup icon The installation tents: Resources: EN.LPROJ window does not open auto- Folder.
Installation - Macintosh OS X (continued) Mac OS X Printer Configuration Page Setup 2. Select Format For: ColourLaser in the Printer Features Page Attributes window (fig. 110). You can configure your printer by 1. Select File from the top menu bar; selecting Page Setup and Printer Fea- then, select Page Setup.
Installation - Macintosh OS X (continued) Note: The install location for your printer’s OS X (version 10.2.1) PPD is Hard Drive: Library: Note: You must double-click the Printers: PPDS: Contents: Re- OSX_setup icon The installation sources: EN.LPROJ Folder. window does not open auto- matically.
Installation - Macintosh OS X (continued) Mac OS X Printer Configuration Page Setup You can configure your printer by 1. Select File from the top menu bar; selecting Page Setup and Printer Fea- then, select Page Setup. tures. 1. Close the Print Center window to return to your desktop.
Installation - Macintosh OS X (continued) 2. Select Format For: ColourLaser in the Note: If the word Generic appears Page Attributes window (fig. 120). below the Format For drop- down menu, the installation 3. Click OK once you have selected the process must be restarted.
Tech Support For more information about the 1-800-926-8393 (US and Canada) ColourLaser or other XANTÉ printers, Other areas, call your XANTÉ please log onto our website: vendor. www.xante.com/help Please Record Your Printer’s Serial Num- • ber Here 251-473-6503 ◊◊◊ •...