Selecting Ppd Options (Windows Nt/2000/Xp) - Xante FilmMaker 4 User Manual

c. Click Apply after you have made the desired changes.
For example, to change the printer memory setting, scroll through the Installable
options until you see VMOption. Highlight it; then, select the amount of memory on
the printer (see the memory size listed on the printer's start-up page). Click Apply.
6. Click OK. The Print dialog box reappears. Then, click OK to send the file to the
printer.

Selecting PPD Options (Windows NT/2000/XP)

To configure a printer feature from the Print dialog box
1. Install and configure the AdobePS printer driver and your printer's PPD
following the instructions in chapter 3.
2. Choose File: Print. The Print dialog box appears (fig. 4.6).
Fig. 4.6 Windows NT 4.0 Print Dialog Box
3. Make sure your printer is selected in the Name box in the Print dialog box (fig.
4.6); then, click Properties.
4. Click the Advanced tab to set printer options (fig. 4.7).
Configuration 4-7