Installation-Windows Nt/2000/Xp; Ip Address Configuration; Printer Driver Installation - Xante FilmMaker 4 Quick Reference Manual

Installation-Windows 98/Me (continued)
Fig. 73 Device Options Window
4. Select Installed for each option your
printer may have; then, click Apply.
5. Click OK.

Installation-Windows NT/2000/XP

This section will take you through the
step-by-step installation process for Windows
NT/2000/XP operating systems.
Note: You (or your network administra-
tor) must first assign an IP address
through the printer's front panel
before continuing installation.

IP Address Configuration

When using the Ethernet interface and
TCP/IP protocol, use the front panel IP
address (Network:IpAddr) configuration
menu and front panel keys to set the address
as follows:
• Reset key increases the current
number flashing by one.
• Menu key moves to the next
number to the right of the current
number flashing.
• Test key moves to the next number
to the left of the current number
flashing.
• Enter key accept new address (if
valid) and returns to Network:
IpAddr menu. The menu will
display a message if the entered
address is invalid.
Note: You must turn the printer off and
restart it for the new IP address to
take effect.
18

Printer Driver Installation

Fig. 74 Click Install Printer.