Redundant Management Module - Dell PowerConnect B-RX Configuration Manual

Commands
show module
show chassis
format slot1 | slot2
pwd
cd <directory-pathname>
chdir <directory-pathname>
dir | ls [<path-name>]
more [/<directory>/]<file-name>
hd [/<directory>/]<file-name>
md | mkdir [slot1 | slot2] <dir-name>
rd | rmdir [slot1 | slot2] <dir-name>
rename | mv [/<directory>/]<old-file-name>
[/<directory>/]<new-file-name>
attrib [slot1 | slot2] ro | rw <file-name>
delete | rm [slot1 | slot2] [<directory>] [<file-name>]
undelete
append [<source-file-system> <dest-file-system>]
[/<source-dir-path>/]<source-file-name>
[/<dest-dir-path>/]<dest-file-name>
copy <from-card> <to-card>
[/<from-dir-path>/]<from-name>
[/<to-dir-path>/][<to-name>]
copy slot1 | slot2 flash [/<from-dir-path>/]<from-name>
monitor | primary | secondary
copy flash slot1 | slot2 <source-name> monitor | primary
| secondary | startup-config [<dest-name>]
copy flash flash monitor standby
copy flash flash primary [standby]
copy flash flash secondary [standby]
copy flash lp <source-file> <dest-file> <slot-number> | all
copy flash tftp <ip-addr> <dest-file-name> primary |
secondary
copy slot1 | slot2 tftp <ip-addr>
[/<from-dir-path>/]<source-file> [<dest-file>]
BigIron RX Series Configuration Guide
53-1001810-01

Redundant management module

See ...
"Determining management module status"
page 35
"Displaying temperature information"
"Formatting a flash card" on page 42
"Determining the current management focus"
page 42
"Switching the management focus"
"Switching the management focus"
"Displaying a directory of the files"
"Displaying the contents of a file"
"Displaying the hexadecimal output of a file"
page 46
"Creating a subdirectory" on page 46
"Removing a subdirectory" on page 48
"Renaming a file" on page 49
"Changing the read-write attribute of a file"
page 49
"Deleting a file" on page 50
"Recovering ("undeleting") a file"
"Appending a file to another file"
"Copying files using the copy command"
"Copying files between a flash card and flash
memory" on page 53
"Copying files between a flash card and a TFTP
server" on page 54
"Copying software images between active and
standby management modules"
"Copying software images between active and
standby management modules"
"Copying software images between active and
standby management modules"
"Copying files from a management module to an
interface module" on page 54
"Copying RX Series IronWare images from flash
memory to a TFTP server" on page 54
"Copying files between a flash card and a TFTP
server" on page 54
E
on
on page 36
on
on page 43
on page 43
on page 43
on page 45
on
on
on page 51
on page 52
on page 52
on page 53
on page 53
on page 53
1353