Clearing Acl And Rate Limit Counters - Dell PowerConnect B-FCXs Configuration Manual

PowerConnect#show access-list accounting traffic-policy g_voip
Traffic Policy - g_voip:
General Counters:
Port Region#
------------------
7 (4/1 - 4/12)
All port regions
Rate Limiting Counters:
Port Region#
------------------
7 (4/1 - 4/12)
All port regions
Syntax: show access-list accounting traffic-policy [<TPD name>]
or
Syntax: show statistics traffic-policy [<TPD name>]
The <TPD name> variable is the name of the traffic policy definition for which you want to display
ACL and traffic policy counters.
Table 109
traffic-policy commands.
TABLE 109
This line...
Traffic Policy
General Counters
Port Region #
Byte Count
Packet Count
Rate Limiting Counters
Port Region#
Green Conformance
Yellow Conformance
Red Conformance

Clearing ACL and rate limit counters

The Dell device keeps a running tally of the number of packets and the number of bytes per packet
that are filtered by ACL statements and rate limiting traffic policies. You can clear these
accumulated counters, essentially resetting them to zero. To do so, use either the clear access-list
accounting traffic-policy command or the clear statistics traffic-policy command.
To clear the counters for ACL counting and rate limit counting, enter commands such as the
following.
PowerConnect(config)#clear access-list accounting traffic-policy CountOne
PowerConnect(config)#clear statistics traffic-policy CountTwo
Syntax: clear access-list accounting traffic-policy <TPD name>
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
--------------------
Green Conformance
------------------
329114195612139520
329114195612139520
explains the output of the show access-list accounting traffic-policy and show statistics
ACL and rate limit counting statistics
Displays...
The name of the traffic policy.
The port region to which the active traffic policy applies.
The number of bytes that were filtered (matched ACL clauses).
The number of packets that were filtered (matched ACL clauses).
The port region to which the active traffic policy applies.
The number of bytes that did not exceed the CIR packet rate.
The number of bytes that exceeded the CIR packet rate.
The number of bytes that exceeded the PIR packet rate.
ACL statistics and rate limit counting
Byte Count
----------------------
85367040
84367040
Yellow Conformance
------------------
37533986897781760
37533986897781760
Packet Count
776064
776064
Red Conformance
------------------
18
0
0
621