Supported Fiber Optic Transceivers - Dell PowerConnect B-FCXs Configuration Manual

Specify the <port> variable in the following formats:
•
Table 41
TABLE 41
This line...
Port
Speed
Local pair
Pair Length
Remote pair
Pair status

Supported Fiber Optic Transceivers

Table 42 lists the Small Form-Factor Pluggable (SFP) and 10-Gigabit Small Form Factor Pluggable
(XFP) fiber optic transceivers supported on PowerConnect devices.
TABLE 42
Supported fiber optic transceivers
Label Manufacturing part number
E1MG-BXD TRPBG1LXDBVS2FY
E1MG-BXU TRPBG1LXDBBSHFY
E1MG-LHA-OM WST-S5CCIU-502FD
E1MG-LX-OM FTLF1318P2BTL-F1
AFCT-5715PZ-FD
E1MG-100FX-OM FTLF1217P2BTL-F1
E1MG-100FX-IR-OM FTLF1323P1BTR-FD
E1MG-SX-OM FTLF8519P2BNL-F1
AFBR-5715PZ-FD
10G-XFP-ER FTRX-1611-3-F1
FIM31110/210
FIM3112/230
10G-XFP-LR FTLX1412D3BCL-F1
AFCT 721XPDZ-FD1
JXPR01LG081FY
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
defines the fields shown in the command output.
Cable statistics
Supported Fiber Optic Transceivers
Displays...
The port that was tested.
The port current line speed.
The local link name. Refer to
The cable length when terminated, or the distance to the point of fault
when the line is not up.
The remote link name.
The status of the link. This field displays one of the following:
•
Terminated: The link is up.
•
Shorted: A short is detected in the cable.
•
Open: An opening is detected in the cable.
•
ImpedMis: The impedance is mismatched.
•
Failed: The TDR test failed.
Type
1000Base-BXD
1000Base-BXU
1000Base-LHA
1000Base-LX
100Base-FX
100Base-FX-IR, 15 km
1000Base-SX
10GBase-ER XFP, 40 km
10GBase-LR XFP, 10 km
Table 40.
Dell part number Supports Digital
Optical Monitoring?
PYD7H No
Y0WGM No
3TP6Y Yes
6JCR4 Yes
JCGF5 Yes
X5FD3 Yes
XR0H5 Yes
V0396 Yes
98CPC Yes
6
191