Displaying Allowed Mac Addresses; Displaying Denied Mac Addresses - Dell PowerConnect B-FCXs Configuration Manual

15
Displaying Information about MAC-based VLANs
This field...
MAC Address
Port
Vlan
Authenticated
Time
Age
Dot1x

Displaying allowed MAC addresses

Enter the following command to display information about successfully authenticated MAC
addresses.
PowerConnect#show table-mac-vlan allowed-mac
-------------------------------------------------------------------------------
MAC Address
-------------------------------------------------------------------------------
0030.4874.3181
Syntax: show table-mac-vlan allowed-mac
The following table describes the information in this output.
This field...
MAC Address
Port
Vlan
Authenticated
Time
Age
Dot1x

Displaying denied MAC addresses

Enter the following command to display information about denied (authentication failed) MAC
addresses.
538
Displays...
The MAC address for which this information is displayed.
The port where MAC-based VLAN is enabled.
The VLAN to which the MAC address has been assigned.
Yes indicates authentication is successful.
No indicates authentication has failed.
Inp indicates authentication in progress
Rst indicates a restricted VLAN
The time at which the MAC address was authenticated. If the clock is set on the Dell
PowerConnect device, then the actual date and time are displayed. If the clock has not been
set, then the time is displayed relative to when the device was last restarted.
The age of the MAC address entry in the authenticated MAC address list.
Indicates if 802.1X authentication is enabled or disabled for the MAC address.
Port Vlan Authenticated Time
2/1/17 76
Displays...
The allowed MAC addresses for which the information is displayed.
The port where MAC-based VLAN is enabled.
The VLAN to which the MAC address has been assigned.
Yes indicates authentication has been successful.
Inp indicates authentication is in progress.
The time at which each MAC address was authenticated. If the clock is set on the Dell
PowerConnect device, then the actual date and time are displayed. If the clock has not been set,
then the time is displayed relative to when the device was last restarted.
The age of the MAC address entry in the authenticated MAC address list.
Indicates whether 802.1X authentication is enabled or disabled for each MAC address.
Age
Yes 00d01h17m22s Ena
PowerConnect B-Series FCX Configuration Guide
dot1x
Dis
53-1002266-01