Displaying Rate Shaping Configurations - Dell PowerConnect B-FCXs Configuration Manual

21
Rate shaping overview
The above commands configure an outbound rate shaper on port 1/14 and port 1/15.
•
Syntax: [no] rate-limit output shaping ethernet <port> <value>
Specify the <port> variable in the following formats:
•
Specify the <value> variable as follows:
•

Displaying rate shaping configurations

To display the configured outbound rate shaper on a device, enter the following command.
PowerConnect#show rate-limit output-shaping
Outbound Rate Shaping Limits in Kbps:
Port
15
The display lists the ports on a device, the configured outbound rate shaper on a port and for a
priority for a port.
648
On PowerConnect B-Series FCX devices, the configured outbound rate shaper (651 Kbps) on
port 1/15 is the rounded to 616 Kbps. The configured 1300 Kbps limit on port 14 is rounded
to 1232 Kbps.
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
On PowerConnect B-Series FCX devices, you can specify a <value> up to the port line rate.
PortMax Prio0
1 - -
2 1302 -
651 -
Prio1 Prio2 Prio3
- - -
- - -
- - -
PowerConnect B-Series FCX Configuration Guide
Prio4 Prio5 Prio6
- - -
- - -
- - -
53-1002266-01
Prio7
651
-
-