Dell PowerConnect B-FCXs Configuration Manual page 180

5
Managing your IronStack
TABLE 31
This field
ID
role
priority
config
Syntax: show stack flash
Displaying stack rel-IPC statistics
Use the show stack rel-ipc stats command to display session statistics for stack units.
PowerConnect# show stack rel-ipc stats
Reliable IPC statistics:
Global statistics:
Pkts rcvd w/no session: 2
Msgs rcvd w/no handler: 0
Unit statistics:
Unit 2 statistics:
Msgs sent: 1678
Message types sent:
[9]=1571,
[19]=53,
Message types received:
[9]=467,
Session statistics, unit 2, channel 0:
Session state: established (last established 31 minutes 7 seconds ago)
Connections established: 1
Remote resets: 0, Reset packets sent: 0
Connection statistics (for current connection, if established):
Msgs sent: 1440, Msgs received: 467
Atomic batches sent: 0, Atomic batches received: 0
Pkts sent: 1242, Pkts received: 1094
Msg bytes sent: 68013, Msg bytes received: 16812
Pkt bytes sent: 291680, Pkt bytes received: 31808
Flushes requested: 108, Suspends: 0, Resumes: 0
Packets sent with data (DAT), ACKs, and window updates (WND):
Other: 1, ACK: 467, WND: 6, ACK+WND: 0
DAT: 768, DAT+ACK: 0, DAT+WND: 0, DAT+ACK+WND: 0
Data retransmits done: 160, Zero-window probes sent: 0
Dup ACK pkts rcvd: 19, Pkts rcvd w/dup data: 0
Pkts rcvd w/data past window: 0
Session statistics, unit 2, channel 2:
Session state: established (last established 31 minutes 5 seconds ago)
Connections established: 1
Remote resets: 0, Reset packets sent: 0
Connection statistics (for current connection, if established):
138
Field descriptions for the show stack flash command
Indicates...
Device ID
The role of this device in the stack
The priority of this device in the stack
Indicates the port state (up or down) and identifies the port by number
(stack-ID/slot/port).
Msgs received: 470, Pkt sends failed: 0
[10]=2,
[10]=1,
[11]=50, [13]=2,
[13]=2,
PowerConnect B-Series FCX Configuration Guide
53-1002266-01