Dell PowerConnect B-FCXs Configuration Manual page 817

PowerConnect#show ip igmp group
Interface v18 : 1 groups
1
Interface v110 : 3 groups
2
3
4
To display the status of one IGMP multicast group, enter a command such as the following.
PowerConnect#show ip igmp group 239.0.0.1 detail
Display group 239.0.0.1 in all interfaces.
Interface v18 : 1 groups
1
Interface v110 : 1 groups
2
If the tracking and fast leave feature is enabled, you can display the list of clients that belong to a
particular group by entering commands such as the following.
PowerConnect#show ip igmp group 224.1.10.1 tracking
Display group 224.1.10.1 in all interfaces with tracking enabled.
Interface v13 : 1 groups, tracking_enabled
1
Syntax: show ip igmp group [ <group-address> ] [ detail | tracking ]
If you want a report for a specific multicast group, enter that group address for <group-address>.
Omit the <group-address> if you want a report for all multicast groups.
Enter detail if you want to display the source list of the multicast group.
Enter tracking if you want information on interfaces that have tracking enabled.
The following table defines the statistics for the show ip igmp group command output.
TABLE 140
This field
Group
Phy-port
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
group phy-port static querier life mode
239.0.0.1 e4/20
group phy-port static querier life mode
239.0.0.1 e4/5
239.0.0.1 e4/6
224.1.10.1 e4/5
group phy-port static querier life mode
239.0.0.1 e4/20
group: 239.0.0.1, include, permit 19 (source, life):
(3.3.3.1 40) (3.3.3.2 40) (3.3.3.3 40) (3.3.3.4 40) (3.3.3.5 40)
(3.3.3.6 40) (3.3.3.7 40) (3.3.3.8 40) (3.3.3.9 40) (3.3.3.10 40)
(3.3.3.11 40) (3.3.3.12 40) (3.3.3.13 40) (3.3.3.14 40) (3.3.3.15 40)
(3.3.3.16 40) (3.3.3.17 40) (3.3.3.18 40) (3.3.3.19 40)
group phy-port static querier life mode
239.0.0.1 e4/5
group: 239.0.0.1, include, permit 10 (source, life):
(2.2.3.0 80) (2.2.3.1 80) (2.2.3.2 80) (2.2.3.3 80) (2.2.3.4 80)
(2.2.3.5 80) (2.2.3.6 80) (2.2.3.7 80) (2.2.3.8 80) (2.2.3.9 80)
group phy-port static querier life mode
224.1.10.1 e4/15
receive reports from 3 clients:
110.110.110.7 110.110.110.8 110.110.110.9
Output of show ip igmp group
Displays
The address of the multicast group
The physical port on which the multicast group was received.
no yes include 19
no yes include 10
no yes 100 exclude 13
no yes include 1
no yes include 19
no yes include 10
no yes include 3
25
IGMP V3
#_src
#_src
#_src
#_src
#_src
775