Clear Mld Snooping Commands - Dell PowerConnect B-FCXs Configuration Manual

27
Configuring MLD snooping
This field
IsEX
ToIN
ToEX
ALLO
BLK
Pkt-Err
Displaying MLD snooping information by VLAN
You can display MLD snooping information for all VLANs or for a specific VLAN. For example, to
display MLD snooping information for VLAN 70, enter the following command.
PowerConnect#show ipv6 mld-snooping vlan 70
version=1, query-t=60, group-aging-t=140, max-resp-t=3, other-qr-present-t=123
VL70: cfg V2, vlan cfg passive, 2 grp, 0 (SG) cache, rtr ports,
0/1/26 has 2 grp, non-QR (passive), cfg V1
0/1/26 has 2 grp, non-QR (passive), cfg V1
0/1/35 has 0 grp, non-QR (QR=fe80::2e0:52ff:fe00:9900, age=20), dft V2 trunk
Syntax: show ipv6 mld-snooping vlan [<vlan-id>]
If you do not specify a vlan-id, information for all VLANs is displayed.
The following table describes information displayed by the show ipv6 mld-snooping vlan command.
This field
version
query-t
group-aging-t
rtr-port
max-resp-t
non-QR
QR

Clear MLD snooping commands

The clear commands for MLD snooping should only be used in troubleshooting situations or when
recovering from error conditions.
904
Displays
Number of source addresses that were excluded in the traffic.
Number of times the interface mode changed from EXCLUDE to INCLUDE.
Number of times the interface mode changed from INCLUDE to EXCLUDE.
Number of times additional source addresses were allowed on the interface.
Number of times sources were removed from an interface.
Number of packets having errors such as checksum errors.
router ports: 0/1/36(120) fe80::2e0:52ff:fe00:9900,
group: ff10:1234::5679, life = 100
group: ff10:1234::5678, life = 100
Displays
The MLD version number.
How often a querier sends a general query on the interface.
Number of seconds membership groups can be members of this group before aging out.
The router ports which are the ports receiving queries. The display router ports:
0/1/36(120) fe80::2e0:52ff:fe00:9900 means port 0/1/36 has a querier with
fe80::2e0:52ff:fe00:9900 as the link-local address, and the remaining life is 120 seconds.
The maximum number of seconds a client can wait before it replies to the query.
Indicates that the port is a non-querier.
Indicates that the port is a querier.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01