Displaying Bgp4 Route-Attribute Entries - Dell PowerConnect B-FCXs Configuration Manual

30
Displaying BGP4 information
TABLE 190
Field
Weight
Atomic
Aggregation ID
Aggregation AS
Originator
Cluster List
Learned From
Admin Distance
Adj_RIB_out
Communities

Displaying BGP4 route-attribute entries

The route-attribute entries table lists the sets of BGP4 attributes stored in the router memory. Each
set of attributes is unique and can be associated with one or more routes. In fact, the router
typically has fewer route attribute entries than routes. To display the route-attribute entries table,
use one of the following methods.
To display the IP route table, enter the following command.
PowerConnect#show ip bgp attribute-entries
Syntax: show ip bgp attribute-entries
Here is an example of the information displayed by this command. A zero value indicates that the
attribute is not set.
PowerConnect#show ip bgp attribute-entries
1
2
Table 191
1086
BGP4 route information (Continued)
Description
The value that this router associates with routes from a specific neighbor. For
example, if the router receives routes to the same destination from two BGP4
neighbors, the router prefers the route from the neighbor with the larger weight.
Whether network information in this route has been aggregated and this
aggregation has resulted in information loss.
NOTE: Information loss under these circumstances is a normal part of BGP4
The router that originated this aggregator.
The AS in which the network information was aggregated. This value applies
only to aggregated routes and is otherwise 0.
The originator of the route in a route reflector environment.
The route-reflector clusters through which this route has passed.
The IP address of the neighbor from which the Layer 3 Switch learned the route.
The administrative distance of the route.
The number of neighbors to which the route has been or will be advertised. This
is the number of times the route has been selected as the best route and placed
in the Adj-RIB-Out (outbound queue) for a BGP4 neighbor.
The communities the route is in.
Total number of BGP Attribute Entries: 7753
Next Hop :192.168.11.1
Originator:0.0.0.0
Aggregator:AS Number :0
Local Pref:100
AS Path :(65002) 65001 4355 2548 3561 5400 6669 5548
Next Hop :192.168.11.1
Originator:0.0.0.0
Aggregator:AS Number :0
Local Pref:100
AS Path :(65002) 65001 4355 2548
lists the field definitions for the command output.
and does not indicate an error.
Metric :0
Cluster List:None
Router-ID:0.0.0.0
Communities:Internet
Metric :0
Cluster List:None
Router-ID:0.0.0.0
Communities:Internet
PowerConnect B-Series FCX Configuration Guide
Origin:IGP
Atomic:FALSE
Origin:IGP
Atomic:FALSE
53-1002266-01