Dell PowerConnect B-FCXs Configuration Manual page 682

20
VLAN-based mirroring
PowerConnect(config)#mirror-port ethernet 1/1/21 input
PowerConnect(config)#vlan 10
PowerConnect(config-VLAN-10)#monitor ethernet 1/1/21
PowerConnect(config)#vlan 20
PowerConnect(config-VLAN-20)#monitor ethernet 1/1/21
PowerConnect(config-VLAN-20)#end
Syntax: [no] monitor ethernet <port>
NOTE
For PowerConnect B-Series FCX devices, since it is possible to have multiple mirror ports, monitor
ports must specify which mirror port they are monitoring.
To disable mirroring on VLAN 20, enter the following commands.
PowerConnect(config)#vlan 20
PowerConnect(config-VLAN-20)#no monitor ethernet 1/1/21
PowerConnect(config-VLAN-20)#end
Displaying VLAN mirroring status
The show vlan command displays the VLAN mirroring status.
PowerConnect#show vlans
Total PORT-VLAN entries: 4
Maximum PORT-VLAN entries: 4060
Legend: [Stk=Stack-Unit, S=Slot]
PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree On
Untagged Ports: (Stk0/S1)
Untagged Ports: (Stk0/S1)
Untagged Ports: (Stk0/S1)
Untagged Ports: (Stk0/S1)
Untagged Ports: (Stk0/S2)
Tagged Ports: None
Uplink Ports: None
DualMode Ports: None
Mac-Vlan Ports: None
PORT-VLAN 10, Name [None], Priority level0, Spanning tree On
Untagged Ports: (Stk0/S1)
Tagged Ports: None
Uplink Ports: None
DualMode Ports: None
Mac-Vlan Ports: None
PORT-VLAN 20, Name [None], Priority level0, Spanning tree On
Untagged Ports: (Stk0/S1)
Tagged Ports: None
Uplink Ports: None
DualMode Ports: None
Mac-Vlan Ports: None
640
Monitoring: Disabled
Monitoring: Enabled
Monitoring: Disabled
3 4 5 6 7
15 16 17 18 19 20
27 28 29 30 31 32
39 40 41 42 43 44
1 2
1
2
PowerConnect B-Series FCX Configuration Guide
8 9 10 11 12 13
21 22 23 24 25
33 34 35 36 37
45 46 47 48
14
26
38
53-1002266-01