Displaying Rp Information For A Pim Sparse Group; Displaying The Rp Set List - Dell PowerConnect B-FCXs Configuration Manual

25
PIM Sparse
1 239.255.163.1
2 239.255.163.2
3 239.255.163.3
4 239.255.162.1
5 239.255.162.2
6 239.255.162.3
Syntax: show ip pim rp-map
This display shows the following information.
TABLE 132
This field...
Group address
RP address

Displaying RP information for a PIM Sparse group

To display RP information for a PIM Sparse group, enter the following command at any CLI level.
PowerConnect#show ip pim rp-hash 239.255.162.1
RP: 207.95.7.1, v2
Syntax: show ip pim rp-hash <group-addr>
The <group-addr> parameter is the address of a PIM Sparse IP multicast group.
This display shows the following information.
TABLE 133
This field...
RP
Info source

Displaying the RP set list

To display the RP set list, enter the following command at any CLI level.
PowerConnect#show ip pim rp-set
Group address Static-RP-address Override
---------------------------------------------------
Access-List 44 99.99.99.5 On
Number of group prefixes Learnt from BSR: 1
Group prefix = 239.255.162.0/24 #RPs expected: 1
#RPs received: 1
RP 1: 43.43.43.1 priority=0 age=0
Syntax: show ip pim rp-set
756
99.99.99.5
99.99.99.5
99.99.99.5
99.99.99.5
43.43.43.1
99.99.99.5
Output of show ip pim rp-map
Displays...
Indicates the PIM Sparse multicast group address using the listed RP.
Indicates the IP address of the Rendezvous Point (RP) for the listed PIM Sparse group.
Info source: 207.95.7.1, through bootstrap
Output of show ip pim rp-hash
Displays...
Indicates the IP address of the Rendezvous Point (RP) for the specified PIM Sparse group.
Following the IP address is the port or virtual interface through which this Layer 3 Switch learned
the identity of the RP.
Indicates the IP address on which the RP information was received.
Following the IP address is the method through which this Layer 3 Switch learned the identity of
the RP.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01