Dell PowerConnect B-FCXs Configuration Manual page 894

26
Configuring IP parameters – Layer 3 Switches
Syntax: show ip dhcp-server address-pool[s] [<name>]
•
•
The following table describes this output.
TABLE 155
This field...
Pool name
Time elapsed since last save
Total number of active leases
Address pool state
IP Address exclusions
Pool configured options
bootfile
dhcp-server-router
dns-server
domain-name
lease
netbios-name server
network
next-bootstrap-server
tftp-server
Display lease-binding information in flash memory
The show ip dhcp-server flash command displays the lease-binding database that is stored in flash
memory.
PowerConnect# show ip dhcp-server flash
The following information is displayed.
PowerConnect# show ip dhcp-server flash
Address Pool Binding:
Syntax: show ip dhcp-server flash
The following table describes this output.
852
netbios-name-server:
network:
next-bootstrap-server:
tftp-server:
address-pool[s] - If you enter address-pools, the display will show all address pools
<name> - Displays information about a specific address pool
CLI display of show ip dhcp-server address pools command
IP Address Client-ID/
Hardware address
192.168.1.2 001b.ed5d.a440
192.168.1.3 0012.f2e1.26c0
192.168.1.101
192.168.1.0 255.255.255.0
192.168.1.102
192.168.1.103
Displays...
The name of the address pool
The time that has elapsed since the last save.
The number of leases that are currently active.
The state of the address pool (active or inactive).
IP addresses that are not included in the address pool
The name of the bootfile
The address of the DHCP server router
The address of the dns server
The name of the domain
The identifier for the lease
The address of the netbios name server
The address of the network
The address of the next-bootstrap server
The address of the TFTP server
Lease expiration Type
0d:0h:18m:59s
0d:0h:19m:8s
PowerConnect B-Series FCX Configuration Guide
Automatic
Automatic
53-1002266-01