Dell PowerConnect B-FCXs Configuration Manual page 185

Table 32
TABLE 32
This field
ID
Stack-port1
Stack-port2
Displaying stack port information
The show stack stack-ports command displays information about stack port status.
PowerConnect(config)# show stack stack-ports
ID
1
2
3
4
5
Syntax: show stack stack-ports
Table 33
TABLE 33
This field
ID
Stack-port1
Stack-port 2
Displaying running configuration information
The show running-config command displays information about the current stack configuration.
PowerConnect(config)# show running-config
Current configuration:
!
ver 7.2.0.a
!
stack unit 1
module 1 FCX-24-port-management-module
module 2 FCX-cx4-2-port-16g-module
module 3 FCX-xfp-1-port-16g-module
stack-port 1/2/1 1/3/1
stack unit 2
module 1 FCX-48-port-management-module
module 2 FCX-xfp-2-port-16g-module
stack unit 3
module 1 FCX-48-port-management-module
module 2 FCX-xfp-1-port-16g-module
module 3 FCX-cx4-1-port-16g-module
stack unit 4
module 1 FCX-48-port-management-module
module 2 FCX-cx4-1-port-16g-module
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
describes the output from the show stack neighbors command.
Field descriptions for the show stack neighbors command
Indicates...
The stack identification number for this unit.
Identifies the neighbor stack unit for stack-port1 for this unit id
Identifies the neighbor stack unit for stack-port2 for this unit id
Stack-port1 Stack-port2
up (1/2/1) up
up (2/2/1) up
up (3/2/1) up
up (4/2/1) up
up (5/2/1) up
describes the output from the show stack stack-ports command.
Field descriptions for the show stack stack-ports command
Indicates...
The stack identification number for this unit
Indicates port state (up or down) and identifies the port by number (stack-ID/slot/port)
Indicates port state (up or down) and identifies the port by number (stack-ID/slot/port)
(1/2/2)
(2/2/2)
(3/3/1)
(4/3/1)
(5/3/1)
Managing your IronStack
5
143