Lldp Statistics - Dell PowerConnect B-FCXs Configuration Manual

Powerconnect b-series fcx
Hide thumbs Also See for PowerConnect B-FCXs:
Table of Contents

Advertisement

PowerConnect#show lldp
LLDP transmit interval
LLDP transmit hold multiplier
LLDP transmit delay
LLDP SNMP notification interval
LLDP reinitialize delay
LLDP-MED fast start repeat count : 3
LLDP maximum neighbors
LLDP maximum neighbors per port
Syntax: show lldp
The following table describes the information displayed by the show lldp statistics command.
This field...
LLDP transmit interval
LLDP transmit hold
multiplier
LLDP transmit delay
LLDP SNMP notification
interval
LLDP reinitialize delay
LLDP-MED fast start
repeat count
LLDP maximum
neighbors
LLDP maximum
neighbors per port

LLDP statistics

The show lldp statistics command displays an overview of LLDP neighbor detection on the device,
as well as packet counters and protocol statistics. The statistics are displayed on a global basis.
The following shows an example report.
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
LLDP-MED attributes advertised by the Dell PowerConnect device
: 10 seconds
: 4
(transmit TTL: 40 seconds)
: 1 seconds
: 5 seconds
: 1 seconds
: 392
: 4
Displays...
The number of seconds between regular LLDP packet transmissions.
The multiplier used to compute the actual time-to-live (TTL) value of an LLDP
advertisement. The TTL value is the transmit interval multiplied by the transmit hold
multiplier.
The number of seconds the LLDP agent will wait after transmitting an LLDP frame and
before transmitting another LLDP frame.
The number of seconds between transmission of SNMP LLDP traps
(lldpRemTablesChange) and SNMP LLDP-MED traps
(lldpXMedTopologyChangeDetected).
The minimum number of seconds the device will wait from when LLDP is disabled on a
port, until a request to re-enable LLDP on that port will be honored.
The number of seconds between LLDP frame transmissions when an LLDP-MED
Endpoint is newly detected.
The maximum number of LLDP neighbors for which LLDP data will be retained, per
device.
The maximum number of LLDP neighbors for which LLDP data will be retained, per port.
24
719

Advertisement

Table of Contents
loading

Table of Contents